Blog
Posts Tagged ‘Asphalt driveway’
Friday, June 30th, 2017
For concrete to retain its integrity and durability, proper installation is always required.
The proper installation methods make a huge difference with every construction project, and installing concrete is no different. What does proper concrete installation look like and how can you ensure that you use a contractor that follows the best practices? Read on! (more…)
Tags: asphalt, Asphalt driveway, Concrete, concrete driveways, Concrete installation, Concrete Repairs
Posted in Concrete Repairs | Comments Off on How Is Concrete Properly Installed?
Friday, June 16th, 2017
Before selecting the materials of your driveway, it is important to know the differences between concrete and asphalt.
Concrete and asphalt are both great materials for parking lots, driveways, and more. If you are
interested in potentially changing the parking lot at your property to concrete or asphalt, here’s
what you need to know. Today we will be discussing the core differences between concrete and
asphalt. (more…)
Tags: asphalt, Asphalt driveway, Concrete, concrete driveway, Driveway maintenance
Posted in asphalt installation | Comments Off on Concrete vs. Asphalt
Friday, June 9th, 2017
There are many reasons that your asphalt may be cracking — and it’s always best to keep some maintenance tips in mind.
Asphalt is a sticky, black and highly glutinous liquid, or semi-solid form of petroleum. Its primary use is for the construction of driveways and road and occasionally used to seal flat roofs, where it is used as the glue or binder mixed with combined particles to produce asphalt concrete. The most common occurrence of cracked asphalt happens when water seeps into the pavement through open cracks, and potholes occur. When the water freezes, expansion occurs thus widening the crack further. During warm weather, the iced water melts away leaving the cracks with open voids. A pothole emerges when the surrounding walls fall into the void. (more…)
Tags: asphalt, Asphalt driveway, Asphalt Maintenance, Driveway maintenance, driveway repair
Posted in Asphalt Driveway Repair, Asphalt Maintenance, Baltimore Crack Filling, General Asphalt Advice | Comments Off on Why Does Asphalt Crack?
Friday, March 24th, 2017
Asphalt driveways are excellent choices; stylistically, they match almost any homestyle and landscape. They’re long-lasting, durable, and are easy to care for. However, not every asphalt driveway is created equal.
Asphalt driveways are excellent choices; stylistically, they match almost any homestyle and landscape. They’re long-lasting, durable, and are easy to care for. However, not every asphalt driveway is created equal. Some are better than others, and it all has to do with construction and quality. When you invest in an asphalt driveway, you want to make sure it’s the best driveway you can have. To find out if your driveway is top-notch, read on for the best qualities of an asphalt driveway.
(more…)
Tags: asphalt, Asphalt driveway, Driveway maintenance, Driveways
Posted in Asphalt Driveway Repair, asphalt installation, Blog | Comments Off on What Makes a Great Asphalt Driveway?
Thursday, August 11th, 2011
Is your driveway in rough shape? Will repairs do the trick? Does it need to be resurfaced? Should you have it redone professionally? These are all questions that homeowners ask themselves when faced with a dilapidated driveway. Ultimately the best thing to do is the contact a professional like My Pavement Guy, but there are some things you can consider on your own.
According to this article on EzineArticles there are some important things to think about before consulting your contractor:
Maintenance is good medicine, but it’s not foolproof
Asphalt driveways don’t remain smooth and black forever. You can take steps to maintain your driveway by sealing and protecting it, but often the effects of heat, ultra-violet rays, and substances such as salt, oil, gas and grease take their toll. And if those don’t get you, then cracking and water penetration eventually will.
Your driveway may be corroded, worn out, or have cracks, which could all warrant a resurfacing job if the condition is severe enough. As a general guide, if repairs are needed on more than 25 percent of the surface, it is more cost-effective to do a hot mix asphalt resurfacing job over the entire driveway.
Say no to cracks!
Asphalt pavement is hard and brittle, and as a result, cracks will develop over time. Ranging from hairline to an inch wide or more, cracks are your driveway’s worst enemy because they let water in. In colder climates, freeze-thaw cycles can be very destructive, and can wreak havoc on your driveway if water penetrates the cracks, then expands as it turns to ice. And even in warmer climates, water penetration can cause serious damage. The larger the crack, the more serious the problem, and the sooner it needs to be fixed. Cracks that are left un-repaired will lead to serious deterioration of the pavement and even to the base layers, requiring complete replacement of the driveway – sooner rather than later in colder climates.
Can it be fixed or do you need a new driveway?
Whether you’ll need to rip out your existing driveway and install a new one, or if you can get away with resurfacing – or even some patchwork and crack-filling – depends largely on the condition of the base layers, or foundation. However, if cracking covers 3/4 of the driveway, the surface is too far gone to repair. The root of the problems may come from lower down, and a complete overhaul should be considered.
If your driveway has been resurfaced several times with hot mix asphalt and keeps deteriorating prematurely, it is likely a problem with the foundation, and you should consider installing a whole new driveway. Likewise, if there are areas that have depressions or mounds, they should be completely reconstructed from the base. If you have several of these areas, a new driveway might make sense.
For any of your asphalt needs or if you have any questions, contact PTG Enterprises aka My Pavement Guy by calling 410-636-8777 or click here
Check us out on Facebook and Twitter as well!
Tags: asphalt, Asphalt cracks, Asphalt driveway, Asphalt installation, Asphalt Maintenance, asphalt maryland, Asphalt Pavement, Asphalt repair, Cost, distress, driveway, driveway repair, expand, fill cracks, liquid asphalt, Maintenance, maryland, My Pavement Guy, pave, pavement, Pavement cracks, Pavement installation, Pavement Maintenance, Pavement Maryland, pavement repair, paving, paving contractor, paving maryland, paving project, Preventative maintenance, PTG Enterprises, re-striping pavement, repave, repaving
Posted in General Asphalt Advice | Comments Off on How to Repair Your Old Asphalt Driveway
Friday, June 24th, 2011
It’s a hole in the road. How hard can it be to fill a hole, right? Well, you might be surprised. Pothole repair is tough work and requires a trained crew and some specialty equipment. This article from PaveManPro.com explains the lengthy repair process.
How to repair a pothole:
1. With a pavement saw or pneumatic hammer, cut the outline of the patch, extending at least 0.3 m (I ft.) outside of the distressed area. The outline should be square or rectangular with two of the sides at right angles to the direction of traffic.
2. Excavate as much pavement as necessary to reach firm support. If a patch is to be an integral part of the pavement, its foundation must be as strong or stronger than that of the original roadway. This may mean that some of the sub-grade will also have to be removed. The faces of the excavation should be straight and vertical.
3. Trim and compact the sub-grade.
4. Apply a tack coat to the vertical faces of the excavation.
5. Backfill with the asphalt mixture. Using a shovel or skid steer loader place the mixture directly from the truck into the prepared excavation. The maximum lift thickness largely depends upon the type of asphalt mixture and the available compaction equipment. Asphalt concrete can and should be placed in deep lifts, since the greater heat retention of the thicker layers facilitates compaction. From a compaction standpoint, patches using asphalt concrete can be backfilled in one lift. However, when placing a patch that is deeper than 3 cm (5 in.) it is often useful to leave the first lift 2.5 to 5 cm (I to 2 in.) below the finished grade, making it easier to judge the total quantity of mixture required for the patch.
On the other hand, patches constructed with mixtures containing emulsified or cutback asphalt must be placed in layers thin enough to permit evaporation of the diluents that make the mixture workable.
6. Spread carefully to avoid segregation of the mixture. Avoid pulling the material from the center of the patch to the edges. If more material is needed at the edge, it should be deposited there, and the excess raked away. The amount of mixture used should be sufficient to ensure that the after compaction the patch surface will not be below that of the adjacent pavement. On the other hand, if too much material is used a hump will raise.
7. Compact each lift of the patch thoroughly. Use equipment that is suited for the size of the job. A vibratory plate compactor is excellent for small jobs, while a vibratory roller is likely to be more effective for larger areas. When compacting the final lift (which may be the only lift), overlap the first pass and return of the vibratory roller or plate compactor to no more than 5 cm (6 in.) on to the patch on one side. Then move to the opposite side and repeat the process. Once this is accomplished, proceed at right angles to the compacted edges, with each pass and return overlapping a few inches on to the uncompacted mix. If there is a grade, compaction should proceed from the low side to the high side to minimize possible shoving of the mix.
8. When adequate compaction equipment is used, the surface of the patch should be at the same elevation as the surrounding pavement. However, if hand tamping or other light compaction methods are used, the surface of the completed patch should be slightly higher than the adjacent pavement, since the patch is likely to be further compressed by traffic.
9. Check the vertical alignment and smoothness of the patch with a straightedge or string line.
So next time you complain about that pothole down the street not getting fixed or next time you think to yourself, “hey, I could do that in half the time,” remember that pothole repair is not a quick fix. Properly patching a pothole takes time, know-how, and a lot of energy.
If you have any questions, contact PTG Enterprises by calling 410-636-8777 or click here
Check us out on Facebook and Twitter as well!
Tags: asphalt, Asphalt cracks, Asphalt driveway, Asphalt installation, Asphalt Maintenance, asphalt maryland, Asphalt repair, Asphalt repair Maryland, Bidding a Pavement Project, Contractor, crack fill, Cracking, distress, driveway, driveway pothole, driveway repair, driveway repair Maryland, failure, fill cracks, FUll-depth patching, Hiring a Contractor, How can you quickly fix a pothole in your driveway?, How do potholes happen, Maintenance, maryland, My Pavement Guy, Parking lot, patching, pave, pavement, Pavement Contractor, Pavement cracks, Pavement installation, Pavement Maintenance, Pavement Maryland, pavement repair, paving, paving contractor, paving maryland, paving project, Permanent fix, Pothole, Pothole driveway, Pothole quick fix, Pothole repair Maryland, Potholes and Repair, Preventative maintenance, PTG Enterprises, quick fix, Re-striping, re-striping asphalt, re-striping pavement, Repair, repave, repaving, reverse bidding, RFP, Sealcoating, Sigsn, Temporary fix, trouble area, troubled area, Wheel Stops
Posted in General Asphalt Advice | Comments Off on Pothole Repair: It’s a Bigger Job Than You May Think
Wednesday, June 15th, 2011
It is so hard to find your father a descent present. After all, all you dad really wants for Father’s Day is some peace and quiet and a little relaxation. But how do you give him that?
In a recent poll done by Harris Interactive, 80% of fathers admitted they wanted gifts related to home improvement. So instead of buying dad another tie or some socks, get him something he really wants, a new driveway. Let your father relax as you have your driveway professionally re-paved.
And who better to do the work than PTG Enterprises, a company that has completed well over 2,000 driveway projects. They will deploy an entire team of professionals to quickly install your brand new driveway.
The paving machine, paired with an experienced operator and a trained crew, will make paving look easy – it’s not. Assuming fabric was not in the scope of work, than the paving team will have a man designated to either spray or spot apply tack coat material. Another ground personnel will be responsible for controlling the movement of trucks. It’s crucially important that the trucks stay in order and the next one up is always ready to go. The hotter the asphalt, the easier it is to work with, hence the longer a truck sits, the cooler the asphalt gets. The asphalt is dumped from the truck to the paver where two men control each side. One man is responsible to make sure the joint lines up with the previous paving pull and the other side is responsible for determining thickness, grade, pitch and fall. Accompanying the paver are usually two ground personnel known as “Lute men”. They take direction from the paving foreman and will spread / rake high and low spots out of areas that were just paved but need minor adjustments. Finally, there is the roller man. He is responsible for the compaction of the freshly laid asphalt. Usually this person will work the roller and also plate tampers and hand tampers in the tight areas where pavers cannot go.
So give your dad something he really wants this Father’s Day – a new, professionally installed driveway and some relaxation. If you have any questions, contact PTG Enterprises by calling 410-636-8777 or click here
Check us out on Facebook and Twitter as well!
Tags: adjust, asphalt crack filler, Asphalt driveway, Asphalt installation, Asphalt Maintenance, asphalt maryland, Asphalt repair, Beautifying Your Driveway, breaking, Brick driveway, cheaper to maintain, cold winters, Concrete installation, Concrete Maryland, conform, contract, Cost, crack filler, Cracking, driveway, Driveway installation, Driveway maintenance, Driveway maintenance tips, driveway repair, driveway sealer, Driveway tips, Driveways, Ease of Repair, expand, Father's Day, Father's Day Celebration, Father's Day Gift, Father's Day Gift Idea, Father's Day Gift Ideas, Father's Day Ideas, Father's Day Present, Father's Day Present Ideas, Father's Day Surprise, Father's DayIdeas, fill cracks, Fill holes, Flexible Material, Flower bed, Flower beds, Gifts for Father's Day, heat, Home, hot summers, House, How To Maintain An Asphalt Driveway, Improving the look of your driveway, initially cheaper, Landscaping your driveway, less cracking, liquid asphalt emulsions, looking like new, maryland, move, My Pavement Guy, no-brainer, oil leaks, oils, Parking lot maintenance, pavement, Pavement installation, Presents for Father's Day, PTG Enterprises, reseal your driveway, Residence, rigid concrete, seal your driveway, sealant, settle, solid cold patch, specific requirements, squeegee, Stone driveway, sun, sway your opinion, tar mixed with fine gravel, The Benefits of an Asphalt Driveway, wear and tear, Weather Resistance, What to do for Father's Day
Posted in General Asphalt Advice | Comments Off on A Father’s Day Driveway
Tuesday, June 7th, 2011
If you are going to put up the money to install a brand new driveway, or if you are just unhappy with the way your current driveway looks, why not try to add a few accents to make your driveway really standout? It is a lot easier than you may think. As this article from eHow.com explains, there are several ways you can turn that boring driveway into the perfect an eye-catching addition to any front yard.
- If you have a long driveway, make it curved instead of a straight line. Installing curves in the driveway to follow the natural contours of your yard can also soften the appearance.
- Place stone or brick edging along the edge of the driveway. This will add the perfect accent to your driveway.
- Install flower beds along the edge of the driveway. This forms a natural boundary between the driveway and the lawn, and planting flowers can brighten the driveway with an array of colors.
- Plant trees along the edge of the driveway. This works better for longer driveways because you have more space to plant trees. One drawback is that it will be years before the trees are fully grown, but once grown the trees provide a shaded canopy over the driveway. Anytime you plant trees near pavement, place them far enough from the pavement that the root system will not grow underneath the pavement and dislodge it.
- Install lighting along the driveway. While this doesn’t do anything to soften the appearance of the driveway during the day, it can provide dramatic effects at night. The lighting can be as simple as a post light near the end of the driveway or as complex as lights placed in trees along the driveway that cast their glow down onto the driveway. Another option is to place path lights along the edge of the driveway. Using many lights can provide a runway effect; using a few path lights spaced far apart can mark the edge of the driveway without making you feel like you’re landing a 737 in front of your house.
Now that you know what to do, you can go liven up your front yard. If you have any questions, contact PTG Enterprises by calling 410-636-8777 or click here
Tags: adjust, Asphalt driveway, Asphalt installation, asphalt maryland, Beautifying Your Driveway, breaking, Brick driveway, cheaper to maintain, cold winters, Concrete installation, Concrete Maryland, conform, contract, Cost, Cracking, driveway, Driveway installation, Driveway maintenance, Driveway maintenance tips, Driveway tips, Driveways, Ease of Repair, expand, Flexible Material, Flower bed, Flower beds, Home, hot summers, House, Improving the look of your driveway, initially cheaper, Landscaping your driveway, less cracking, liquid asphalt emulsions, maryland, move, My Pavement Guy, no-brainer, pavement, Pavement installation, PTG Enterprises, Residence, rigid concrete, settle, solid cold patch, Stone driveway, sway your opinion, tar mixed with fine gravel, The Benefits of an Asphalt Driveway, Weather Resistance
Posted in General Asphalt Advice | Comments Off on Beautifying Your Driveway
Wednesday, May 18th, 2011
Pavement ants, also known as house ants or sugar ants, can be quite a nuisance. They set up camp in your yard or inside the cracks in your pavement and eventually work their way into your home. The best thing to do when you find pavement ants is to rid yourself of the infestation as soon as possible.
But how can you do that? You are no exterminator and you don’t want to have to run to the hardware store to buy ant spray, right? Well, you can use one household item to help assist you in your quest for an ant free existence – salt.
That’s right, all you need is everyday salt. This article from eHow.com explains several solutions to rid yourself of those pesky pavement ants using nothing but common table salt.
1. Sprinkle ordinary table salt on cracks in the driveway, along the sides and where the ants are present. Make sure the driveway and surrounding areas are dry before applying salt for the best effectiveness.
2. Repeat weekly until the ants are gone. After consuming the salt, the ants will drink water or other moisture until they essentially explode. Be aware that the salt will also kill any weeds or plants present, so use caution.
3. Draw a line with salt at the end of the driveway on the pavement to prevent the ants from crossing over into the lawn or home.
4. If table salt is not effective, purchase a sweet ant bait trap that contains boric acid salt. (Boric acid is a hydroponic salt.) The ants are attracted to the sugar in the bait, consume the boric acid salt with the sugar, and then take the poison back to their home, where it spreads to the other ants.
5. Place the ant baits along the sides and ends of the driveway. Use caution when using ant baits because boric acid can be toxic to pets and humans as well as insects.
If you have any questions, contact PTG Enterprises by calling410-636-8777 or click here today!
Tags: Ant extermination, Ants in the cracks of pavement, asphalt, Asphalt driveway, Asphalt installation, Asphalt Maintenance, asphalt maryland, Asphalt repair, Asphault Institute, Baltimore, Cost, Cracking, driveway repair, environmental asphalt, Exterminating Ants, Exterminating ants by yourself, Exterminating Ants in the cracks of pavement, fill cracks, green asphalt, How to, How to easily kill ants, How to kill ants, How to Rid Yourself of Pavement Ants in Your Driveway, Killing ants, Killing Ants in the cracks of pavement, liquid asphalt, maryland, My Pavement Guy, Parking lot, pave, pavement, Pavement Maryland, pavement repair, paving, paving contract, paving contractor, paving contractors, paving maryland, paving project, paving repair, PTG Enterprises, Removing Ants in the cracks of pavement, repave, repaving, repaving project, request for proposal
Posted in General Asphalt Advice | 3 Comments »
Wednesday, May 11th, 2011
There are several factors working against your asphalt driveway – heat, sun, oils and everyday wear and tear – that will, over time, slowly deteriorate your parking surface. So if you don’t want your driveway to crumble around you, you need to constantly maintain your asphalt.
This article from eHow.com outlines 6 easy steps to keep your asphalt driveway looking like new.
1. First, take good care of your driveway throughout the years. Keep grass clippings off of it by sweeping after every time you mow your lawn. The seeds in the clippings can find their way into tiny cracks in your asphalt and sprout grass. Not only is it an eyesore, it can make the cracks even larger. As soon as you see any weeds growing in a crack or hole in your driveway, spray it with weed killer so the crack doesn’t get larger. Also remember to clean up any substance from your asphalt driveway as soon as possible. If you have oil leaks or something of the like that is puddling in your driveway, take the time to clean it up with a little soap and water. These are all good steps in caring for your asphalt driveway.
2. Once every 2-3 years you will want to reseal your driveway. This is what’s going to make the biggest difference in the appearance of your driveway. Resealing is actually just putting a very thin new layer of asphalt on top of the existing driveway. Visit your home and garden retailer of choice to find the products listed in the “items needed” section such as the crack filler, squeegee, and sealant.
3. Plan to reseal on a warm day when it’s about 50 degrees or a bit warmer. Also plan to NOT use your driveway for 24-48 hours after application. Once you’ve moved all the cars off of the driveway, trim any grass at the edges of your driveway back. Now you’ll have to clean your driveway’s cracks and holes. You can use household cleaners, or, if you have a power washer, it’s much easier to use the power washer along with a driveway cleaner/degreaser you can find at places such as Lowe’s or Home Depot. Let the entire driveway dry thoroughly before moving on.
4. Now, fill any cracks or holes you may currently have in your driveway with an asphalt crack filler. Follow the directions on the particular bottle you choose, some work differently than others. Allow the patch to dry for 24 hours (or whatever your product recommends).
5. The next day, sweep the driveway. Now sweep again with someone else helping by washing the driveway alongside you with a hose. It’s very important for the driveway to be clean of all dirt and particles – even in the small cracks. Now use the power washer and driveway cleaner (or your choice of household cleaner) again, but this time all over the driveway. You may need to scrub severe oil stains with a brush. Let it dry.
6. Apply the driveway sealer (usually comes in a 5 gallon bucket) in thin coats. Use the squeegee to apply in a thin layer. It’s better to do two very thin layers than one thick layer. Keep stirring the sealer in the bucket throughout the process. Remember to check your particular product for specific requirements (some need water misted on it, etc). Now block your driveway off and don’t touch it for 24-48 hours.
If this does not help, it may be time to consult a professional. If you have any questions, contact PTG Enterprises by calling410-636-8777 or click here today!
Tags: asphalt crack filler, Asphalt driveway, Asphalt installation, Asphalt Maintenance, Asphalt repair, crack filler, Driveway installation, Driveway maintenance, driveway repair, driveway sealer, fill cracks, Fill holes, heat, How To Maintain An Asphalt Driveway, looking like new, maryland, My Pavement Guy, oil leaks, oils, Parking lot maintenance, PTG Enterprises, reseal your driveway, seal your driveway, sealant, specific requirements, squeegee, sun, wear and tear
Posted in General Asphalt Advice | 1 Comment »
