There are several factors working against your asphalt driveway – heat, sun, oils and everyday wear and tear – that will, over time, slowly deteriorate your parking surface. So if you don’t want your driveway to crumble around you, you need to constantly maintain your asphalt.

This article from eHow.com outlines 6 easy steps to keep your asphalt driveway looking like new.

1.   First, take good care of your driveway throughout the years. Keep grass clippings off of it by sweeping after every time you mow your lawn. The seeds in the clippings can find their way into tiny cracks in your asphalt and sprout grass. Not only is it an eyesore, it can make the cracks even larger. As soon as you see any weeds growing in a crack or hole in your driveway, spray it with weed killer so the crack doesn’t get larger. Also remember to clean up any substance from your asphalt driveway as soon as possible. If you have oil leaks or something of the like that is puddling in your driveway, take the time to clean it up with a little soap and water. These are all good steps in caring for your asphalt driveway.

2.   Once every 2-3 years you will want to reseal your driveway. This is what’s going to make the biggest difference in the appearance of your driveway. Resealing is actually just putting a very thin new layer of asphalt on top of the existing driveway. Visit your home and garden retailer of choice to find the products listed in the “items needed” section such as the crack filler, squeegee, and sealant.

3.   Plan to reseal on a warm day when it’s about 50 degrees or a bit warmer. Also plan to NOT use your driveway for 24-48 hours after application. Once you’ve moved all the cars off of the driveway, trim any grass at the edges of your driveway back. Now you’ll have to clean your driveway’s cracks and holes. You can use household cleaners, or, if you have a power washer, it’s much easier to use the power washer along with a driveway cleaner/degreaser you can find at places such as Lowe’s or Home Depot. Let the entire driveway dry thoroughly before moving on.

4.   Now, fill any cracks or holes you may currently have in your driveway with an asphalt crack filler. Follow the directions on the particular bottle you choose, some work differently than others. Allow the patch to dry for 24 hours (or whatever your product recommends).

5.   The next day, sweep the driveway. Now sweep again with someone else helping by washing the driveway alongside you with a hose. It’s very important for the driveway to be clean of all dirt and particles – even in the small cracks. Now use the power washer and driveway cleaner (or your choice of household cleaner) again, but this time all over the driveway. You may need to scrub severe oil stains with a brush. Let it dry.

6.   Apply the driveway sealer (usually comes in a 5 gallon bucket) in thin coats. Use the squeegee to apply in a thin layer. It’s better to do two very thin layers than one thick layer. Keep stirring the sealer in the bucket throughout the process. Remember to check your particular product for specific requirements (some need water misted on it, etc). Now block your driveway off and don’t touch it for 24-48 hours.

If this does not help, it may be time to consult a professional. If you have any questions, contact PTG Enterprises by calling410-636-8777 or click here today!